The truck was originally 2bbl carb. Somebody changed intake and put 4bbl Holly on truck. Want to change back to just a standard Ford 2bbl carb. What all do I need to do so?
Vehicle is manual choke vehicle. 302 ci. Ford F100 Ranger.How do I change from 4bbl to 2bbl carb on 1969 Ford F100?Two ways.
You could use a 2 barrel carburetor adapter plate on your current intake manifold.
You could replace the 4 barrel intake manifold with a 2 barrel manifold.
If setup correctly, the 4 barrel will get the same or better fuel mileage, as long as you use a light touch on the throttle. This is because the engine is normally running on the primary barrels, these are usually smaller then the barrels used on a 2 barrel carburetor. The secondaries (all 4 barrels) are not opened until the engine is placed under a load (heavy foot on the throttle). The secondaries are operated by engine vacuum and only open as much and as long as the engine demand requires.How do I change from 4bbl to 2bbl carb on 1969 Ford F100?
if you want to change it back from 4 barrell to a 2 barrell, you will have to drain the radiator and change the intake to a 2 barrell intake or get an adapter from a 4 barrell to a 2 barrell.How do I change from 4bbl to 2bbl carb on 1969 Ford F100?You'll have to buy a 2bbl carb and manifold. Then you'll have to change manifolds and carbs and readjust the linkage. probably.How do I change from 4bbl to 2bbl carb on 1969 Ford F100?
you need a 2 barrel intake, a 2 barrel carburetor and intake and carburetor gaskets and whatever linkage might be necessary and tools/manual.How do I change from 4bbl to 2bbl carb on 1969 Ford F100?You can buy an adapter plate. Much easier than changing the manifold.
禄禄禄How do I change from 4bbl to 2bbl carb on 1969 Ford F100?
You would need to oreder a 2barrel intake manifold then put the 2 barrel carb on top of that.
I think you're going to be surprised how little your fuel mileage changes. You won't even notice it.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment